Publications 2006

R. Brüning, P. Scholz, I. Morgenthal, F. Hollstein, B. Ondruschka
Katalytische oxidative Dehydrierung von 2-Butanol zu 2-Butanon in der Gasphase
Chemie Ingenieur Technik 78 (2006), No. 1–2, 52–55

T. Büttner, G. Walther, A. Böhm
Metallschaum auf der Basis von Ni-Superalloys
Konstruktion, Springerverlag 1/2 (2006), 6–7

D. Handtrack, F. Despang, C. Sauer, B. Kieback, N. Reinfried, Y. Grin
Fabrication of ultra-fine grained and dispersion-strengthened titanium materials by spark plasma sintering
Materials Science and Engineering A 437 (2006), 423-429

D. Handtrack, C. Sauer, B. Kieback
Ultra-fine Grained and Dispersion-strengthened Titanium Materials Manufactured by Spark Plasma Sintering
Extended Abstracts of 2006 Powder Metallurgy World Congress, Busan, Korea, Part 2, 725–726

J. Hübelt, T. Geyer, G. Stephani, H. Göhler
Measuring Characteristic Values of a New Metallic Absorber to Predict the Transmission Loss of Ducts with a Porous Absorbing Lining
Proceedings of the Inter Noise 2006, Honolulu, Hawaii, USA (2006)

H. Kessel, J. Hennicke, J. Schmidt, T. Weißgärber, B. Kieback, M. Herrmann, J. Raethel
Feldaktiviertes Sintern (FAST) – eine neues Verfahren zur Herstellung metallischer und keramischer Sinterwerkstoffe
Tagungsband Hagener Symposium
Pulvermetallurgie in Wissenschaft und Praxis, Band 22, 2006, 201–237

M. Nöthe, M. Schulze, R. Grupp, B. Kieback, A. Haibel, J. Banhart
Analysis of Particle Rearrangement During Sintering by Micro Focus Computed Tomography (μCT)
Proceedings, PM World Congress & Exhibition, Busan, Korea: Progress in Powder Metallurgy, Part 1 (2006), 493–496; Materials Science Forum, Vols. 534–536 (2007), 493–496

M. Nöthe, M. Schulze, R. Grupp, B. Kieback, A. Haibel, J. Banhart
Analysis of Particle Rearrangement During Sintering by Micro Focus Computed Tomography (μCT)
Extended Abstracts, PM World Congress, Busan, Korea, Part 2 (2006), 808–809

P. Quadbeck, G. Stephani, K. Kümmel, J. Adler, G. Standke
Synthesis and Properties of Open-Celled Metal Foams
Proceedings, PM World Congress & Exhibition, Busan, Korea: Progress in Powder Metallurgy, Part 2 (2006), 1005–1008; Materials Science Forum, Vols. 534–536 (2007), 1005–1008

P. Quadbeck, G. Stephani, K. Kümmel, J. Adler, G. Standke
Synthesis and Properties of Open-Celled Metal Foams Extended Abstracts Powder Metallurgy
World Congress, Busan, Korea, Part 1 (2006), 103

M. Reinfried, U. Waag, G. Stephani, B. Kieback
Three dimensinal honeycomb structures
In: H. Nakajima, N. Kanetake (Eds.): Porous Metals and Metal Foaming Technology, Sendai, The Japan Institut of Metals, 161-64

J. Schmidt, T. Schubert, T. Weißgärber, B. Kieback
Herstellung von partikelverstärkten Verbundwerkstoffen mit Titan-Matrix durch Kurzzeitsintern
9. Werkstofftechnisches Kolloquium »Verbundwerkstoffe und Werkstoffverbunde«, Chemnitz (2006), 13–19

J. Schmidt, T. Schubert, T. Weißgärber, B. Kieback
Short Time Sintering of Particulate Reinforced Titanium MMCs
Proceedings, International Symposium on Inorganic Interfacial Engineering, Stockholm, Schweden, 125 (2006)

J. Schmidt, T. Weißgärber, T. Schubert, B. Kieback
Spark plasma sintering of intermetallics and metal matrix composites
Advances in Powder Metallurgy & Particulate Materials 2006; Proceedings, International Conference on Powder Metallurgy & Particulate Materials, San Diego, USA, 9 (2006), 85–94

T. Schubert, T. Weißgärber
Cu-based composites prepared by Powder Metallurgy for Thermal Management of Electronic Devices
Proceedings, International Conference on Powder Metallurgy & Particulate Materials, San Diego, USA, 9 (2006), 44–52

G. Stephani, O. Andersen, H. Göhler, C. Kostmann, K. Kümmel, P. Quadbeck, M. Reinfried, T. Studnitzky, U. Waag
Iron Based Cellular Structures – Status and Prospects
Advanced Engineering Materials 8, No. 9, 2006, pp. 847-852

G. Stephani, O. Andersen, H. Göhler, C. Kostmann, K. Kümmel, P. Quadbeck, M. Reinfried, T. Studnitzky, U. Waag
Iron Based Cellular Structures – Status and Prospects Porous Metals and Metal Foaming Technology
MetFoam2005 Ed. H. Nakajima and N. Kanetake (2006), 21–26

G. Stephani, H. Göhler, P. Quadbeck, T. Studnitzky
Iron Based PM Cellular Materials – Manufacturing,
Properties and Applications
Extended Abstracts, PM World Congress, Busan, Korea, Part 1, (2006), 99–100

G. Walther, L. Schneider, T. Weißgärber, F. Gebhard, M. Holderied
Unter Öl laufende Reibschichten für Synchronringe
Tribologie und Schmierungstechnik, Expert Verlag, Renningen, 6 (2006)

H. Weidmüller, T. Weißgärber, T. Hutsch, R. Hünert, T. Schmitt, K. Mauthner, J. Schulz-Harder
Carbon-Nanofiber Reinforced Cu Composites by Powder Metallurgy for Thermal Management of Electronic Devices
Proceedings, 3rd Korea-Germany Joint Seminar on Nanostructured Materials, Ulsan, Korea, (2006), 59–66

H. Weidmüller, T. Weißgärber, T. Hutsch, R. Hünert, T. Schmitt, K. Mauthner, J. Schulz-Harder
Carbon-Nanofiber Reinforced Cu Composites by Powder Metallurgy for Thermal Management of Electronic Devices
Proceedings, PM World Congress & Exhibition, Busan, Korea: Progress in Powder
Metallurgy, Part 2 (2006), 853–856; Materials Science Forum, Vols. 534–536 (2007), 853–856

H. Weidmüller, T. Weißgärber, T. Hutsch, R. Hünert, T. Schmitt, K. Mauthner, J. Schulz-Harder
Carbon-Nanofiber Reinforced Cu Composites by Powder Metallurgy for Thermal Management of Electronic Devices Extended Abstracts, Powder Metallurgy
World Congress, Busan, Korea, Part 2 (2006), 844–845