Publications 2017

O. Andersen, H. Göhler, C. Kostmann, P. Quadbeck, F. Diologent, D. Colas, B. Kieback
Powder metallurgically manufactured cellular metals from carat gold alloys for decorative applications
Metal Powder Report, Vol. 73, Issue 2, 2017, 72-79

B. Bergk, U. Mühle, B. Kieback
Nanocrystalline Alloys of Molybdenum with Sodium and Yttrium obtained by Mechanical Alloying
Proceedings Euro PM 2017, Mailand, Italien, 01.-5.10.2017, ISBN 978-1-899072-47-7

I. Bürger, M. Dieterich, C. Pohlmann, L. Röntzsch, M. Linder
Standardized hydrogen storage module with high utilization factor based on metal hydride-graphite composites
Journal of Power Sources, Vol. 342, 2017, 970–979

M. Dressler, T. Studnitzky, B. Kieback
Additive manufacturing using 3D screen printing technique
Proceedings – International Conference on Electromagnetics in Advances Applications (ICEAA) IEEE-APWC, Verona, September 2017, ISBN 978-1-5090-4451-1, 978-1-5090-4450-4, 978-1-5090-4452-8

N. Eißmann, B. Klöden, T. Weißgärber, B. Kieback
High-entropy alloy CoCrFeMnNi produced by powder metallurgy
Powder Metallurgy, Vol. 60, 2017, 184-197

A. Gabler, C. I. Müller, T. Rauscher, M. Köhring, B. Kieback, L. Röntzsch, W. Schade
Ultrashort pulse laser-structured nickel surfaces as hydrogen evolution electrodes for alkaline water electrolysis
International Journal of Hydrogen Energy, Vol. 42, Issue 16, 2017, 10826-10833

U. Gaitzsch, G. Walther, T. Weißgärber, B. Kieback
MoSi2 – A candidate material for biomass gasification atmospheres
Proceedings Intermetallics 2017, Bad Staffelstein, 03.-06.10.2017, ISBN 978-3-9816508-9-1, 144-145

F. Heubner, S. Mauermann, B. Kieback, L. Röntzsch
Stress development of metal hydride composites for high density hydrogen storage applications
Journal of Alloys and Compounds, 705, 2017, 176-182

T. Hutsch, F. Aßmann, T. Weißgärber, B. Kieback
TFP Reinforced Metal - One Way to Increase the Specific Strength
21. Symposium on Compounds
Key Engineering Materials, Vol. 742, 2017, 349-357

T. Hutsch, T. Schubert, T. Weißgärber, B. Kieback
Silver/Diamond Composite Material - Powder Metallurgical Route and Thermo-Physical Properties
21. Symposium on Composites
Key Engineering Materials, Vol. 742, 2017, 151-157

T. Jaumann, M. Gerwig, J. Balach, S. Oswald, E. Brendler, R. Hauser, B. Kieback, J. Eckert, L. Giebeler, E. Kroke
Dichlorosilane-Derived Nano-Silicon inside Hollow Carbon Spheres as High-Performance Anode in Li-Ion Batteries 
Journal of Materials Chemistry A, 2017, 5, 9262-9271

T. Jaumann, J. Balach, U. Langklotz, V. Sauchuk, M. Fritsch, A. Michaelis, V. Teltevskij, D. Mikhailova, S. Oswalda, M.Klose, G. Stephani, R. Hauser, J. Eckert. L. Giebeler
Lifetime vs. rate capability: Understanding the role of FEC and VC in highenergy Li-ion batteries with nano-silicon anodes
Energy Storage Materials 6, 2017, 26–35

F. Kaiser, P. Simon, U. Burkhardt, B. Kieback, Y. Grin, I. Veremchuk
Spark Plasma Sintering of Tungsten Oxides WO_x (2.50 ≤ x≤ 3): Phase Analysis and Thermoelectric Properties
Crystals 7(9), 2017, 271

T. Klemm, A. Hassabou, A. Abdallah, O. Andersen
Thermal energy storage with Phase Change Materials to increase the efficiency of solar photovoltaic modules
Energy Procedia, Vol. 135, 2017, 193-202

T. Klemm, A. Hassabou, O. Andersen
Thermal Energy Storage with Phase Change Materials to Increase the Efficiency of Solar Modules
Proceedings 11th International Renewable Energy Storage Conference (IRES 2017)

B. Klöden, A. Kirchner, S. Vock, M. Jurisch, M. Süß, C. Schöne, T. Weißgärber, B. Kieback, R. Stelzer
Additive Fertigung mittels Electron Beam Melting (EBM): vom Pulver bis zur Anwendung in der Mobilität
In: H. Kolaska, H. Danninger, B. Kieback (Eds.): Pulvermetallurgie in Wissenschaft und Praxis, Pulvermetallurgie – Schlüssel zur Mobilität, Band 33, Heimdall Verlag, 2017, ISBN 978-3-946537-36-6, 261-284

R. Kolvenbach, A. Gerstle, D. Beton, A. Tillmann, L. Torkuhl, G. Walther, T. Büttner, B. Kieback, T. Weißgärber
Filtration in der Mobilität auf Basis von Metalllegierungsschäumen
In: H. Kolaska, H. Danninger, B. Kieback (Eds.): Pulvermetallurgie in Wissenschaft und Praxis, Pulvermetallurgie – Schlüssel zur Mobilität, Band 33, Heimdall Verlag, 2017, ISBN 978-3-946537-36-6, 107-133

M.A. Lagos, I. Agote, T. Schubert, T. Weißgärber. J.M. Gallardo, J.M. Montes, L. Prakash, C. Andreouli, V. Oikonomou, D. Lopez, J.A. Calero
Development of electric resistance sintering process for the fabrication of hard metals: Processing, microstructure and mechanical properties
International Journal of Refractory Metals and Hard Materials 66, 2017, 88-94

J. Meinert, Ch. Ebermann, E. Titze
Latente Speicher für die Wärmeversorgung von Gebäuden – Zwischen Simulation und Technikum
GI - Gebäudetechnik in Wissenschaft & Praxis, Vol. 138, No. 05, 2017, 384-397

P. Quadbeck, A. Strauß, L. Wimbert, B. Kieback
Atmosphere study on the thermal decomposition behavior of delubrication aiding additives
Proceedings Euro PM 2017, Mailand, Italien, 01.-5.10.2017, ISBN 978-1-899072-47-7

T. Rauscher, C.I. Müller, A. Gabler, T. Gimpel, M. Köhring, B. Kieback, W. Schade, L. Röntzsch
Femtosecond-laser structuring of Ni electrodes for highly active hydrogen evolution
Electrochimica Acta, Vol. 247, 2017, 1130-1139

K. Reuter, M. Rohne, T. Studnitzky, O. Andersen, B. Kieback
Additive manufacturing of high performance copper heat exchangers via 3D screen printing
In Contributed Papers from Materials Science & Technology 2017, ISBN-10: 0-87339-766-5, ISBN-13: 978-0-87339-766-7, 245-247

K. Reuter, S. Wiedenmann, T. Studnitzky, O. Andersen, B. Kieback
3D Screen Printing – Analysis of tolerance to print high quality metallic structures
Proceedings Euro PM 2017, Mailand, Italien, 01.-5.10.2017, ISBN 978-1-899072-47-7

S. Riecker, O. Andersen, S.B. Hein, T. Studnitzky, B. Kieback
Integrated process line for fused filament fabrication of metallic parts using metal poder loaded filaments
In Contributed Papers from Materials Science & Technology 2017, ISBN-10: 0-87339-766-5, ISBN-13: 978-0-87339-766-7, 256-258

S. Riecker, S.B. Hein, T. Studnitzky, O. Andersen, B. Kieback
3D printing of metal party by means of Fused Filament Fabrication – a non-beam-based approach
Proceedings Euro PM 2017, Mailand, Italien, 01.-5.10.2017, ISBN 978-1-899072-47-7

A. Semenov, J. Trapp, M. Nöthe, O. Eberhardt, T. Wallmersperger, B. Kieback
Experimental and numerical analysis of the initial stage of field-assisted sintering of metals
Journal of Materials Science Vol. 52, Issue 3, 2017, 1486-1500

A. Schlott, J. Hörstmann, K. Tittes, O. Andersen, J. Meinert
High Power Latent Heat Storages With 3D Wire Structures – Numerical Evaluation Of Phase Change Behavior
Energy Procedia, Vol. 135, 2017, 75-81

A. Schlott, J. Meinert, O. Andersen
Zellulare Werkstoffe für innovative energietechnische Anwendungen
GI - Gebäudetechnik in Wissenschaft & Praxis, Vol. 138, No. 05, 2017, 412-421

A. Schlott, J. Hörstmann, O. Andersen, J. Meinert
High Power Latent Heat Storages with 3D Wire Structures –Numerical Evaluation of Phase Change Behavior
Proceedings 11th International Renewable Energy Storage Conference (IRES 2017)

M. Tegel, S. Schöne, B. Kieback, L. Röntzsch
An efficient hydrolysis of MgH2-based materials 
International Journal of Hydrogen Energy, Vol. 42, Issue 4, 2017, 2167-2176

G. Walther, U. Gaitzsch, T. Büttner, B. Kieback, T. Weißgärber, R. Kolvenbach, M. Lincke
Applications of Metal Foam as Catalyst Carrier
Proceedings Euro PM 2017, Mailand, Italien, 01.-5.10.2017, ISBN 978-1-899072-47-7

H. Wüst, L. Bommer, A.M. Huber, D. Goll, T. Weißgärber, B. Kieback
Preparation of nanocrystalline Ce1−xSmx(Fe,Co)11Ti by melt spinning and mechanical alloying
Journal of Magnetism and Magnetic Materials, Vol. 428, 2017, 194-197