Mold Deposit Analysis in the Injection-Molding Process

Identifying Causes and Resolving Problems Sustainably

Deposits in injection molds are associated with various defect patterns and can substantially reduce mold productivity. For example, larger accumulations may require process interruption and cleaning when unacceptable imprints or gloss variations appear on molded-part surfaces. However, even extremely thin, invisible deposits can be critical, causing sticking in the mold and resulting demolding problems.

Material-related causes of deposits – such as additives, contaminants, or degradation products – can be investigated and identified analytically.

Mold deposit analysis provides the basis for going beyond symptom removal to understand and specifically address the underlying cause of deposit formation.

When Is Mold Deposit Analysis Appropriate?

Practical experience repeatedly shows that not every mold deposit problem can be solved with a coating or surface treatment. If the desired self-cleaning effect cannot be achieved reliably, optimizing the material may be beneficial.

Experience shows that polymer manufacturers may know the formulations used but often cannot clearly identify the constituents actually responsible for deposit formation.

This applies particularly when:

  • Deposits appear only after long operating periods or in small quantities
  • Complex additive blends are used
  • Deposit formation varies between batches

In such cases, analysis is often the fastest and most economical route to reliable findings and a sustainable solution strategy.

Our Approach: Systematic Root-Cause Analysis as the Basis for Sustainable Solutions

Successful mold deposit analysis requires a combination of materials-science, analytical, and process-engineering expertise.

The objective of our mold deposit analysis is to identify the deposit-forming constituents unambiguously and understand the underlying mechanism. Only then can appropriate measures be derived—from adjusting the material or process to implementing a specifically tailored surface or coating strategy.

Our approach includes:

  1. Reproduction of the deposit formation in the laboratory without thermal damage
  2. Analysis and identification of the principal deposit-forming substances
  3. Screening of suitable mold coatings
  4. Derivation of technical measures, for example through:
  • Optimization of material selection or additive packages
  • Adaptation of mold or process concepts
  • Targeted selection of suitable coatings

Analytical Methods

Analytical methods are always selected according to the specific deposit and the question to be answered. Depending on the case, a wide range of analytical methods is available, including:

  • FTIR
  • GC-MS
  • ToF-SIMS
  • PiFM (nanoIR)
  • XPS

The focus is on targeted and cost-efficient analytical work that establishes a robust cause-and-effect relationship. This not only characterizes the deposits but also provides a technically understanding of how they form.

Specific Application Examples

Use Case 1: Additive-Induced Mold Deposit Formation

In one injection-molding process, mold deposit formation resulted in very high cleaning effort. Analysis of the deposits identified fatty exudates from an additive as the primary cause.

Light microscopy image of deposits on a mold surface (left) and ToF-SIMS distribution maps
© Fraunhofer IFAM
Light microscopy image of deposits on a mold surface (left) and ToF-SIMS distribution maps of the deposit-forming substance, grease (right).

Use Case 2: Sticking PMMA Components Caused by Wax Deposits

A red-pigmented PMMA molded part tended to stick and exhibited surface defects. The cause was deposit formation from outgassing LDPE wax. The wax was used as a dispersing aid in the color masterbatch and contained a fraction of very low-molecular-weight, volatile wax molecules, which formed a sticky deposit only a few nanometers thick as well as particles.

Red-colored PMMA part (left). Wax particles on the surface (right) have caused flow marks and a matt finish.
© Fraunhofer IFAM
Red-colored PMMA part (left). Wax particles on the surface (right) have caused flow marks and a matt finish. The mold stuck due to the formation of a continuous wax film.

Your Benefits

A sound mold deposit analysis offers several benefits:

  • Decisions based on verified data rather than assumptions
  • Sustainable reduction of mold deposit formation
  • More stable processes and longer cleaning intervals
  • Avoidance of unnecessary coating or material changes
  • A robust basis for technical and economic optimization

Mold deposit analysis provides clarity – and thus the basis for effective solutions in the injection-molding process.

Combining Mold Deposit Analysis and Coatings Effectively

Mold coatings are often a highly effective approach to reducing deposit formation. However, this requires a stable self-cleaning effect in which emerging deposits are reliably removed from the mold by the molded part during every cycle.

If this is not possible because of the properties of the deposit-forming component, surface optimization reaches its limits. In such cases, we recommend mold deposit analysis.

Mold deposit analysis and coating are therefore not competing approaches, but complementary elements of a sustainable solution strategy.