Mold Deposit Formation in Injection Molds

Understanding Causes, Removing Deposits, Stabilizing Processes

Mold deposits (plate-out, mold fouling) are among the most common causes of unstable injection-molding processes, quality problems, and increasing demolding forces. Because deposit formation often develops gradually, its effects are frequently recognized only after substantial cleaning or maintenance effort has already become necessary.

A systematic root-cause analysis, suitable cleaning methods, and appropriate mold surfaces can selectively reduce deposits and sustainably improve process stability.

Typical Causes of Mold Deposits

© Fraunhofer IFAM

The causes of mold deposits frequently lie in the polymer itself. Many deposit-forming constituents are already present in the molding compound or are generated by degradation during processing. These substances share limited solubility in the polymer melt. Their behavior varies with molecular weight and volatility:

  • Low-molecular-weight compounds can evaporate and primarily clog the vents
  • Higher-molecular-weight deposit formers can plate out and form a film in the cavity

In addition to material-related causes, process and handling errors can also lead to deposits. These include:

  • Insufficient drying
  • Foreign polymers
  • Contamination
  • Thermal overloading

Mold deposit formation cannot always be predicted reliably. Even with identical molds and comparable parameters, it may vary considerably depending on material quality, formulation, or compounding condition.

 

Further information on this topic can be found in our publication Mechanisms of deposit formation in injection moulding cavities and the role of tool coatings and internal release agents - ScienceDirect

Consequences of Mold Deposits

Deposits build up and degrade over time. Both effects have adverse consequences: deposits increasingly obstruct the cavity and typically cause surface defects. It is often overlooked that deposits can also increase the tendency of molded parts to stick and thus cause demolding problems.

In addition, degraded and aged deposits are often substantially more difficult to remove. Besides requiring much longer cleaning intervals, they may also damage the mold surface itself, for example through microcorrosion.

Removing Mold Deposits

In practice, cleaning is usually performed manually or with supporting methods. The appropriate method depends on the deposit, the mold surface, and the sensitivity of the mold. Dry cleaning processes used include:

The objective is to remove deposits as efficiently as possible without unnecessarily attacking the mold surface or causing consequential damage. At the same time, the cause of deposit formation should be considered so that cleaning does not provide only a short-term remedy.

Coatings for Reducing Mold Deposit Formation

Coatings can substantially reduce mold deposit formation. This requires excellent non-stick properties that produce a self-cleaning effect: emerging deposits detach from the mold and are removed with the molded part. The cleaning of the molds is also facilitated.

This can provide the following benefits:

  • Longer cleaning intervals
  • More stable processes
  • Lower scrap rates
  • Lower demolding forces
  • Reduced maintenance effort

Limitations of Coatings

Even optimally designed coatings cannot completely prevent every form of mold deposit formation. If deposit-forming constituents interact only weakly with the polymer due to their material properties, or if the additive system is unfavorably formulated, the self-cleaning effect may be limited.

In such cases, targeted root-cause analysis of the material and additive system is required. The decisive question is therefore whether the deposits primarily originate from the process, the material, or the mold surface.

Our Solution Approach: Analyze Causes and Select Targeted Measures

We use a staged approach to mold deposit problems:

  1. Analysis of the process and application situation: assessment of the material, process control, mold, and defect pattern
  2. Classification of the cause: assessment of whether a coating or another mold-surface solution is appropriate
  3. Targeted selection of suitable coatings
  4. Systematic mold deposit analysis where required: identification of the cause when material- or additive-related deposit formation is suspected

This structured approach helps not only to remove deposits, but also to understand how they form and to stabilize the process sustainably.