UltraPLAS® mold coatings combine several properties that are crucial in the injection-molding process:
Low Surface Energy:
UltraPLAS® release coatings have very low surface energies of approximately 20–28 mJ m−2. These values are well below the surface energies of thermoplastics and their internal release agents. This reliably reduces adhesion between the mold surface and the polymer melt. It is a key factor in minimizing demolding forces and achieving stable release behavior throughout the process.
High Mechanical Stability:
Plasma technology enables very high crosslink densities. The coatings are correspondingly hard and abrasion-resistant (up to 800 HV, equivalent to Mohs hardness 6). As a result, their release properties are retained even under mechanical loading and aggressive cleaning conditions. This is particularly relevant when surfaces are cleaned regularly or used in demanding series-production processes.
Very Low Coating Thickness and High Contour Fidelity:
UltraPLAS® coatings are deposited at thicknesses of less than 300 nm. They are amorphous and therefore exceptionally smooth (Ra < 0.5 nm). Mold dimensions, degrees of polish, and microstructures remain unchanged. Even nanoscale structures and high-gloss surfaces are reproduced completely and without distortion.
Chemical Resistance and Temperature Stability:
The coatings are chemically stable in contact with polymer melts and remain resistant even at the highest mold-surface temperatures. Heat transfer is unaffected. They are therefore also suitable for demanding high-performance polymers and processes with narrow temperature windows.
Transfer-Free and PFAS-Free:
UltraPLAS® release coatings are firmly bonded to the mold surface and do not transfer to the molded parts. Unlike conventional release aids, they are not consumed and contaminate neither the mold nor the component. They therefore provide a PFAS-free alternative for demanding applications, including areas subject to stringent regulatory requirements such as medical technology and food-contact applications.
Operating Principle at the Interface:
UltraPLAS® acts primarily by selectively reducing adhesion between the mold and the polymer. Depending on the material, additive system, and process conditions, additional self-cleaning effects may occur. In this case, emerging deposits detach from the mold during demolding and are removed with the component. The operating principle is therefore not based on a short-lived release agent, but on a permanently tailored interface with reproducible properties.